iHome speakers are great for listening to music, but If you’re like most people, who don’t know how to reset iHome speaker when their speakers sound starts to fade or the buttons stop working or it may be in a frozen state.
In this article, we’ll show you how to properly reset the iHome speaker in just a few simple steps. I’ll discuss the procedure for the following home speakers: iBT84, BT620, iBT374, iHome iBT76, and iHome iBT297.
How to reset iHome Bluetooth speaker?
There is no hassle in resetting the iHome speaker. It’s quite an easy process that would only take a few minutes of your time. All you need is to have the device and the instructions handy.
How to reset the iHome iBT84 speaker?
Firstly, you have to insert a paperclip end into the reset hole on the back of the speaker. this will only reset the speaker without erasing any Bluetooth settings of the speakers.
Secondly to Reset the Bluetooth settings, hold down the Bluetooth/ Speakerphone button for about 9-12 seconds until you see the blue light flashing.
Your iHome iBT84 speaker now has a factory reset.
How to reset the iHome iBT620 speaker?
In order to reset your iHome BT620 speaker, you’ll need to press and hold the reset/ Speakerphone/ Play/Pause Button for almost 10 seconds until you see the blue flashing light.
How to reset the iHome iBT374 speaker?
Before resetting the iHome iBT374 speaker, make sure it’s fully charged. to confirm how much charge is left press the Color Mode/ Battery Review Button on the backside of the speaker.
In order to reset the iHome speaker, hold down the Bluetooth/ Speakerphone Button for about 8 seconds until you hear the beep sound or the blue light blinking.
It will take almost one 1 minute to complete the factory resetting of the speakers.
However there is also a Reset port available, all you have to do is to put a small pin inside it and press it for almost 2 seconds until you hear the beep sound.
How to reset iHome speaker iBT76?
Reset it by following these steps if your iHome iBT76 won’t function as it should:
You have to press and hold down the volume up and down button at the same for almost 10 seconds.
When the blue flashing light appears, you may let go of both buttons since your speaker has reverted to its original settings.
How to reset the iHome iBT297?
If you’re experiencing problems with your iBT297, such as it not working correctly or the sound quality being poor, you may need to reset it. This process is simple and only takes a few minutes.
- Hold the Bluetooth button down for about 10 seconds until the speaker turns off.
- Release the button and wait a few seconds.
- Press and hold the power button again until the speaker turns on.
- You should now see the iBT297’s led flashing blue. If not, try restarting your device.
Final Words:
Resetting your iHome speaker is an easy process that should only take a few seconds of your time. If you’re experiencing any problems with your speaker, resetting it may solve the issue. We’ve outlined the steps for resetting some of the most popular iHome speakers in this article. We hope you found it helpful.
Frequently Asked Questions:
-
How do I get my iHome speaker to work?
Most expert says that if your speaker is not working, chances are that it is not getting any power. So the first thing you should check is to make sure the power cord is plugged in securely to an outlet and your speaker. If it still doesn’t work, try resetting it.
-
Why is my iHome blinking red?
If your iHome is blinking red, it means that battery power is low. You can plug the iHome into a power outlet to recharge it, or replace the batteries if they are running low.
-
Why is my iHome Bluetooth not working?
First, make sure your device is compatible with Bluetooth. Next, check to see if the speaker is turned on and in pairing mode. If it is, make sure your device is discoverable.
-
Why does my iHome speaker keep turning off?
Make sure that your speaker is fully charged. If it is not, plug it in and let it charge for a few hours. Next, try restarting your device. If your speaker still keeps turning off, try resetting it.